Click here to Visit the RBI’s new website

BBBPLogo

Tenders



(144 kb)
Date : Nov 06, 2024
Corrigendum - Design, Supply, Installation, Testing and Commissioning of 4 nos.16.5 T.R. (minimum) air-cooled floor mounted ductable packaged air-conditioners for CVPS proposed location at Reserve Bank of India, Kanpur

Tender No: RBI/Kanpur Regional Office/Estate/18/24-25/ET/545

With reference to the above e-tender, it has been decided to amend specification in Sr 1,4 and 6 of unpriced BOQ/ Price Bid of tender document. Revised BOQ will be read as

Sr No of BOQ/Price Bid Revised Clause
1 Supply of minimum 16.5TR capacity, floor mounted packaged ductable air-conditioners with multi-scroll, air-cooled compressors using HFC based refrigerant (R410 based) at AC 3 phase, 415V, 50HZ etc. complete. The unit should be complete with all required components such as DX Coil, Filter blower Section ductable indoor units with motor and drive with suitable stand (both for ODU and IDU), Microprocessor based control panel, outdoor condensing units etc. The fan for outdoor unit shall be selected for low noise and the motor etc. shall be housed in a powder coated casing with anti-vibration mounts etc. Indoor unit shall be acoustically treated. Required electrical safety in control panel- single phase prevention, reverse phase protection etc. Outdoor units shall be provided with suitable size angle iron stand duly painted as directed and supported on concrete structure. Each AC unit is provided with two circuits, blue fin condenser and corrosion resistant body. The rates include charge of refrigerant during first charging
4 Supply, Installation, Testing and Commissioning (SITC) of uPVC pipe for drain piping of size 40/50 mm dia. with 6 mm thick - nitrile rubber insulation with masking tape on complete pipe with supports, sleeves, hangers etc.
6 Supply, fabrication, installation, testing and commissioning (SITC) of GI metal ducting (either factory fabricated or fabricated at site) (for supply and return) complete with neoprene rubber gaskets, splitter damper, turning vanes, access doors, angle supports, flanges, MS rods etc. as per the drawing. It shall be as per SMACNA standards or relevant IS standards or as advised by Bank’s engineer.

2. All the items from Sr. No-3 to 13 may be read as Supply, Installation, Testing and Commissioning (SITC) in addition to the description mentioned for the items. Other conditions in the tender remain unchanged.

Regional Director
Reserve Bank of India
Kanpur



2024
2023
2022
2021
2020
2019
2018
2017
2016
2015
Archives
Top