Extension of Last Date of Submission May 13, 2024 Reserve Bank of India, Chandigarh had invited the tender RBI/Chandigarh Regional Office/Estate/1/24-25/ET/13 comprehensively through RBI website (www.rbi.org.in) and MSTC Portal (www.mstcecommerce.com) under Two Bid system (Techno-Commercial and Financial Bid) for the captioned work. The last date for submission of e-tender through MSTC Portal is May 10, 2024 till 01:00 PM. 2. In this connection, all eligible and participating firms are requested to peruse the following amendment (highlighted in bold in Table I) in item no. 12 of Part II for submitting their tender documents. Table I | Item No. of BOQ in tender | Description | Amendment | | 12 | Providing and fixing factory made Single glass fixed and openable (casement) and fixed UPVC white colored windows of approx. height 1020 mm and mullion spaced at an average distance of 1000 mm (spacing of mullion may be more or less than 1000mm based on site condition to provide uniform layout and aesthetic look) (variation of 50mm in dimension given should be consider while quoting the rate) comprising of UPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), Single glass panes of 5.00 mm thick frosted toughened glass, EPDM gasket, 2 Nos 3D hinges for each shutter/panels, zinc alloy (white powder coated) casement handles along with zinc plated mild steel multi point locking having transmission, UPVC extruded glazing beads of appropriate dimension as per the thickness of glass, G.I fasteners 100 x 8 (Minimum) mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished masonry/structural elements shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Work should be complete in all respect in finished item of work including of supply of all materials, labor, sundries, taxes CPOH and no any other payment will be made for this work. The window should be provided with all required hardware and accessories made of any one of the profile.
Casement window made of 5.00 thick Frosted toughened glass, frame & sash with 2 Nos 3D hinges for each sash. Profile shall be made of frame of 60 x 60 mm & sash / mullion 60 X 74 both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. | Providing and fixing factory made Single glass fixed and openable (casement) and fixed UPVC white colored windows of approx. height 1020 mm and mullion spaced at an average distance of 1000 mm (spacing of mullion may be more or less than 1000mm based on site condition to provide uniform layout and aesthetic look) (variation of 50mm in dimension given should be consider while quoting the rate) comprising of UPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), Single glass panes of 5.00 mm thick frosted toughened glass, EPDM gasket, 2 Nos 2D hinges/Concealed Window Hinge for each shutter/panels, zinc alloy (white powder coated) casement handles along with zinc plated mild steel multi point locking having transmission, UPVC extruded glazing beads of appropriate dimension as per the thickness of glass, G.I fasteners 100 x 8 (Minimum) mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished masonry/structural elements shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Work should be complete in all respect in finished item of work including of supply of all materials, labor, sundries, taxes CPOH and no any other payment will be made for this work. The window should be provided with all required hardware and accessories made of any one of the profile.
Casement window made of 5.00 thick Frosted toughened glass, frame & sash with 2 Nos 2D hinges/Concealed Window Hinge for each sash. Profile shall be made of frame of 60 x 60 mm & sash / mullion 60 X 74 both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. | 3. All the other terms and conditions mentioned in the Tender Document remains unchanged. 4. Any amendment / corrigendum / clarification regarding this tender will be uploaded on the website / e-portal only. 5. The Bank reserves the right to reject any or all the tenders without assigning any reason. Regional Director
Reserve Bank of India
Chandigarh |
|